Store
tools
The DELTA 33-411 includes 5 HP, 230 Volts, 1 Phase, TEFC motor with electro-mechanical blade brake, 16" blade guard with anti-kickback attachment, retractable leaf guard, cutterhead return attachment, 16" combination blade, cuttinghead clamp knob, adjustable crosscut stop, steel legs, instruction manualExclusive, "Turret Arm" construction permits the sawblade to rotate a full 360° above the work table. Gives full table capacity for cutting both right and left hand miters.Unique, "Micro-Set" miter stops assures perfect right & left miter cuts for the life of the saw.Lifetime, track rods feature glass-smooth hardened surfaces to minimize roller friction.Up-front operating controls are conveniently located for safe, easy operation.Six positive, convenient table leveling jacks help sustain saw table-to-track arm parallelism for excellent cutting accuracy.Table measures a full 44" X 36-1/2".Convenient fence lock knobs allows user to adjust and lock-in the desired fence position at the front of the machine.Cutterhead return automatically pulls the cutterhead behind the fence so material can be quickly repositioned for the next cut.Extra-long turret arm provides maximum outboard rip and crosscut.
The DELTA 36-790 includes 7-1/2 HP, 200-220/440 Volts (wired for 220 Volts), 60 hz, Three Phase motor with low-voltage (LVC) push-button station, magnetic starter and automatic reset overload, blade guard, BIESEMEYER® Commercial Fence System, guide bar, miter gauge, 43" x 59" table with two extension wings and fence support extension, instruction manual, **Table has removable table insert with buit-in leveling screws**, **Note: blade will not go completely below table unless youuse a 12" or smaller block--16" blade lowest position is 1.4" above table surface; 14" blade lowest position is 0.4" above table surface**Powerful motor handles the hardest woods.Double V-belt drive has 2 speeds for best cutting performance. Motor plate, trunnions and arbor support bracket are constructed of cast-iron for solid support and vibration-free operation.Arbor runs on pre-lubricated, sealed ball bearings and raises to the correct height and angle by a rack and wormscrew operating mechanism.T-slots on either side of saw blade hold miter gauge securely.Trunnion stops, adjustable from the top of the table, assure perfect 90° and 45° settings.Massive table provides extra support for handling large stock. Table is heavily-ribbed to prevent warping and distortion.The three-point locking Fence System ensures the fence will be precisely parallel to the blade and will provide a smooth clean cut accurate to within 1/64th of an inch.
The DELTA 33-410 includes 3 HP, 230 Volts, Single Phase, TEFC motor with electro-mechanical blade brake, 16" blade guard with anti-kickback attachment, retractable leaf guard, cutterhead return attachment, 16" combination blade, cuttinghead clamp knob, adjustable crosscut stop, steel legs, instruction manualExclusive, "Turret Arm" construction permits the sawblade to rotate a full 360° above the work table. Gives full table capacity for cutting both right and left hand miters.Unique, "Micro-Set" miter stops assures perfect right & left miter cuts for the life of the saw.Lifetime, track rods feature glass-smooth hardened surfaces to minimize roller friction.Up-front operating controls are conveniently located for safe, easy operation.Six positive, convenient table leveling jacks help sustain saw table-to-track arm parallelism for excellent cutting accuracy.Table measures a full 44" X 36-1/2".Convenient fence lock knobs allows user to adjust and lock-in the desired fence position at the front of the machine.Cutterhead return automatically pulls the cutterhead behind the fence so material can be quickly repositioned for the next cut.Extra-long turret arm provides maximum outboard rip and crosscut.
24 X 42 WOODWORKING LATHE Supported by heavy-duty cast iron legs, featuring 2 diameter adjustable feet Precisionground bedways 3-step, Poly V-belt drive Cast iron headstock and tailstock feature positive cam-action locking devices Stationary headstock Digital spindle readout (RPM) Remote power switch Tool rest designed with finger guide, allowing more control Forward/reverse rotationSTANDARD EQUIPMENT 3HP TEFC motor Safety shield 3 face plate and face plate wrench 14 tool rest Spur and live (ball bearing) centers Knockout rod Spindle lock 24-position indexer Remote power switch
25/37 Drum Sander Sand Smart Control Eliminates the guess-work of manually controlling the infinitely-variable feed speed Simplifies the sanding operation Provides a consistent finish even with varying grain pattern and density Greatly increases abrasive planing and dimensioning speed Maintains highest possible feed rate without overload Standard on all 220 Volt Series drum sander models 25 and 27, Single and Double Drum Continuous-duty 5HP motor, 208- 230 Volt power, single or 3 Phase SandSmart automatic control of the infinite-variable feed rate (0-15 ft./min.) for the conveyor gives a perfect finish Multiple grit sanding in single pass with double drum models Precisely dimension stock within .010 across width of sander 25 or 37 wide sanding capacity Height of the rear drum is indepen- dently adjustable in relationship to the front drum Optional ProScale depth gauge allows incredible accuracy Precision-flattened steel conveyor bed reinforced with four steel cross sections for no Self-cooling drum with abrasive Take- Up-Fasteners make changing abrasive quick and easy plus keeping abra- sives tight Sand as thick as 12 with 37 models and 6 with 25 models Sand as thin as 1/32 and as short as 2-1/4 (single drum) 3-1/2 (double drum) models Cast stand, zinc-plated steel bed, centerless ground column tubes Dust Collection- mandatory for all models: 25 - 600 CFM min., 37 1200 CFM min. Shipped assembled, some minimal assembly required Drum ball bearings are sealed and permanently lubricated 220 Volt Models 733003 SuperMax 25 single drum, 1 Ph 733103 SuperMax 25 single drum, 3 Ph 713003 SuperMax 25x2 dual drum, 1 Ph 713103 SuperMax 25x2 dual drum, 3 Ph 736003 SuperMax 37 single drum, 1 Ph 736103 SuperMax 37 single drum, 3 Ph 737003 SuperMax 37x2 dual drum, 1 Ph 737103 SuperMax 37x2 dual drum, 3 Ph Optional Accessories 59120 Abrasive Cleaning Stick 98-0130 Casters* (Set of 4) *Included with 37 models 98-2501 25 Infeed/Outfeed Tables 98-3701 37 Infeed/Outfeed Tables 61-1004 25 Poly Conveyor Belt 61-1007 37 Poly Conveyor Belt 98-0118 ProScale DRO (Digital Depth Gauge) 98-0070 Rack-N-Roll (Abrasive Storage Shelf) 72-1321 Magnetic Starter - 1 phase 72-1311 Magnetic Starter - 3 phase Abrasives 36-220 Grit Abrasives 24-220 Grit
25/37 Drum Sander Sand Smart Control Eliminates the guess-work of manually controlling the infinitely-variable feed speed Simplifies the sanding operation Provides a consistent finish even with varying grain pattern and density Greatly increases abrasive planing and dimensioning speed Maintains highest possible feed rate without overload Standard on all 220 Volt Series drum sander models 25 and 27, Single and Double Drum Continuous-duty 5HP motor, 208- 230 Volt power, single or 3 Phase SandSmart automatic control of the infinite-variable feed rate (0-15 ft./min.) for the conveyor gives a perfect finish Multiple grit sanding in single pass with double drum models Precisely dimension stock within .010 across width of sander 25 or 37 wide sanding capacity Height of the rear drum is indepen- dently adjustable in relationship to the front drum Optional ProScale depth gauge allows incredible accuracy Precision-flattened steel conveyor bed reinforced with four steel cross sections for no Self-cooling drum with abrasive Take- Up-Fasteners make changing abrasive quick and easy plus keeping abra- sives tight Sand as thick as 12 with 37 models and 6 with 25 models Sand as thin as 1/32 and as short as 2-1/4 (single drum) 3-1/2 (double drum) models Cast stand, zinc-plated steel bed, centerless ground column tubes Dust Collection- mandatory for all models: 25 - 600 CFM min., 37 1200 CFM min. Shipped assembled, some minimal assembly required Drum ball bearings are sealed and permanently lubricated 220 Volt Models 733003 SuperMax 25 single drum, 1 Ph 733103 SuperMax 25 single drum, 3 Ph 713003 SuperMax 25x2 dual drum, 1 Ph 713103 SuperMax 25x2 dual drum, 3 Ph 736003 SuperMax 37 single drum, 1 Ph 736103 SuperMax 37 single drum, 3 Ph 737003 SuperMax 37x2 dual drum, 1 Ph 737103 SuperMax 37x2 dual drum, 3 Ph Optional Accessories 59120 Abrasive Cleaning Stick 98-0130 Casters* (Set of 4) *Included with 37 models 98-2501 25 Infeed/Outfeed Tables 98-3701 37 Infeed/Outfeed Tables 61-1004 25 Poly Conveyor Belt 61-1007 37 Poly Conveyor Belt 98-0118 ProScale DRO (Digital Depth Gauge) 98-0070 Rack-N-Roll (Abrasive Storage Shelf) 72-1321 Magnetic Starter - 1 phase 72-1311 Magnetic Starter - 3 phase Abrasives 36-220 Grit Abrasives 24-220 Grit
The DELTA 43-792 includes 7 1/2HP, 3450 RPM three-phase motor with automatic brake, 5-speed belt and pulley system, Cast-iron sliding table, 3/4" and 1 1/4" Spindles, Three steel insert rings, Work hold-down and cutterhead guard assembly, Fence assembly, Tools and instruction manualDependable three phase motor has an automatic brake that stops cutter in seconds. Belt tension lever lets operator change spindle quickly and easily.Work hold-downs help secure workpiece to table and fence.Drop-in spindles (3/4" or 1 1/4" diameter) are easily mounted or removed, using a locking nut and special wrench supplied with the machine. Three removable steel table insert rings are supplied to accommodate various cutter diameters.Up-front controls include a large emergency stop button, forward/reverse switch for changing spindle rotation, start/stop switch and spindle lock for removing or replacing cutter.Heavy cast-iron table measuring 31 3/4" X 39 5/8" for supporting large workpieces.Extruded aluminum fence mounted on heavy cast iron assembly is fully sdjustable. Two ports, measuring 4" diameter, accept an accessory dust collector connector for a cleaner work environment.Sliding table glides on six adjustable ball bearings for smooth table travel.Table Lock halts sliding action for conventional shaping operation.Miter gauge with work clamp provides extra hold-down support for large shaping projects.
Powermatic 201 Planer, 7.5HP 1PH 230VCast iron 1300 lb. construction for solid performance without vibration2 feed speeds - 20/30 fpm - accommodates rough and fine finish workSegmented infeed roller with sectional chipbreaker allows multiple board planing4-knife head offers 19,200 cuts per minute and widest capacity in its classRoller bearing-mounted feed rollers for long lifeAdjustable bed rollers allow smooth feeding of rough or finished workpiecesOversized cast iron table travels on 2 large lead screws for heavy duty supportStandard Equipment:Dust collection chute with 5" portAdjustable foot padsKnife setting gaugeTool kit (6, 8, and 10mm wrenches, 12-14mm, and 22-24mm combination wrenches)
Powermatic 201 Planer, 7-1/2HP, 3Ph, 230VCast iron 1300 lb. construction for solid performance without vibration2 feed speeds - 20/30 fpm - accommodates rough and fine finish workSegmented infeed roller with sectional chipbreaker allows multiple board planing4-knife head offers 19,200 cuts per minute and widest capacity of its classRoller bearing-mounted feed rollers for long lifeAdjustable bed rollers allow smooth feeding of rough or finished workpiecesOversized cast iron table travels on 2 large lead screws for heavy duty supportStandard Equipment:Dust collection chute with 5" portAdjustable foot padsKnife setting gaugeTool kit (6, 8, and 10mm wrenches, 12 x 14mm, and 22 x 24mm combination wrenches)
This 1,300 lb. heavy-duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives. The hood comes standard with a 5 dust port for easy attachment to any dust collection system. The cutterhead is complete with four high speed steel knives and turns at 4,800 rpm producing 19,200 cuts per minute. The anti-kick back fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The well designed infeed and outfeed rollers are fitted with roller bearings for long roller life. The sectional infeed and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed roller facilitates both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. You may easily raise the massive ribbed cast iron, ground finished table 1 /16 with each turn of the hand wheel. The model 201 is available with a 7-1 /2 horsepower, 3-phase or single-phase motor. This planer is perfect for the small to medium shop with continuous planing requirements. Cast iron 1300 lb. construction for solid performance without vibration 2 feed speeds - 20/30 fpm - accommodates rough and fine finish work Segmented infeed roller with sectional chipbreaker allows multiple board planing 4-knife head offers 19,200 cuts per minute and widest capacity in its class Roller bearing-mounted feed rollers for long life Adjustable bed rollers allow smooth feeding of rough or finished workpieces Oversized cast iron table travels on 2 large lead screws for heavy duty support Standard Equipment: Dust collection chute with 5' port Adjustable foot pads Knife setting gauge Tool kit (6, 8, 10mm wrenches and 12-14mm, 22-24mm combination wrenches) 1 Year Warranty Brochure
Powermatic PM3000 14' Tablesaw, 5HP 1PH, w/ 50' Accu-Fence SystemQuick release riving knife greatly reduces binding/kickback riskPush button arbor lock (patent pending) for rapid blade changePoly-V drive belt system delivers efficient, quiet operationWide stance heavy-duty trunnion for stability and smooth blade positioningAdjustable angle indicators (patent pending) on the blade bevel scale for repeatable bevel cutsIndustrial-duty Accu-Fence® System ensures accurate cutsEnclosed cabinet with wide footprint for stabilityHeavy-duty micro adjustable miter gauge with aluminum extruded fence, for extended crosscut support and fine angle adjustmentsPrecision ground high luster cast iron table top with front edge bevel prevents snagging of workpiece while positioningHeavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movementJumbo stop switch offers fast access to controlsBuilt in 4" port for dust collectionStandard Equipment:TEFC motor with magnetic controlsStandard left and right cast iron table wingsAccu-Fence® System with 50" to the right cutting capacityExtension table and legsArbor wrenchMotor coverBlade, power cord plug not included
The PM3000 brings heavyweight performance and patented innovations to the 14-inch table saw arena. The riving knife rises and lowers with the blade, substantially reducing kickback risk; and both riving knife and blade guard each have a quick-release, so mounting and removing them is fast and tool-free. A wide-stance trunnion and concave teeth on the trunnion gears promote smooth blade raising/tilting. The Poly-V drive belt system results in quieter, more efficient power transfer with virtually no vibration and less heat build-up. A push-button arbor lock is accessible from above the table top and eliminates the need for dual arbor wrenches. Easy-access controls include jumbo stop switch. Sloped cabinet floor and built-in port for dust extraction. Comes standard with a 33 DuramineTM surfaced extension table and legs.